The spreader bar is made of steel with pressed loops at the ends. If necessary, attach the stick to the centerline with cable ties, etc. or with a rubber band / o-ring. When buying a complete spreader, it comes with 35 cm ropes in 4 mm D-Pro or 3/4 mm plastic wire with loops at both ends. You can attach it to the center line with a soft shackle or with your own solution. When ordering tuglines, you order 35 cm shorter than usual. (ex. team normally 1200 mm with spreader 850 mm) Only the spreader stick can be used with your regular PE or D-Pro tuglines as well.

Available in orange, black,blue and yellow and five standard lengths. If you want your own lengths email us!

D-Pro is a pure "HMPE core" that is provided with a special "coating" (= impregnation), which protects the line against abrasion and UV radiation. Very low elongation and high breaking load characterize these ropes. A braided rope made of the new generation HMPE (High Modulus PolyEthylene) fiber. Dyneema is a trademark for HMPE fiber that was previously protected by patents. Today the patent has expired. This fiber is called D-Pro. 70% stronger than steel wire and 7 times lighter! Perfect for winch line, tow line, kite line, surf line, etc. Breakload: 1600 N

Available in 8 colors and five standard lengths. If you want your own lengths email us!

Used with a combine harness or any other type of harness with rings in the side. Made of 6 mm Polyester Silk, 8 mm stainless hydralic pipe as spreader and 2 brass hooks. Available in 6 different colors, all with inverted reflexes. The size (width) should be close to the hip width. To wide WP- lines, the wickets increase in the line by pull and too narrow increases the risk of abrasions on the hip and thighs. If wider or narrower sizes are needed, type it in the notification area.